There’s something incredibly freeing about driving a Jeep Wrangler with the doors off. It’s a feature that embodies the spirit of adventure and open-air exploration. The 2025 Jeep Wrangler makes this process easier than ever, but it still requires care and the right technique. This guide will walk you through how to remove and reinstall the doors properly so you can enjoy the breeze without the hassle.

Before you start, gather the necessary tools. You’ll need a T40 Torx bit (included in your Wrangler’s toolkit), a towel or blanket to protect the doors once they’re off, and a secure spot to store them. If your Wrangler is equipped with power mirrors or locks, you’ll also be dealing with electrical connections. And don’t forget to roll the windows down before you begin—this helps protect the glass during removal.

To remove the doors:

1. Fold in the side mirrors – This gives you better access to the door hinges and wiring.
2. Unhook the door check strap – Open the door and unclip the black nylon strap that prevents the door from swinging open too far.
3. Disconnect electrical wiring (if equipped) – If your doors have power accessories, locate the wiring harness near the check strap, slide back the red locking tab, and gently unplug it.
4. Remove the hinge bolts – Use the T40 Torx bit to unscrew the two bolts on each door hinge. Store the bolts safely—there’s a compartment in the cargo area for this exact purpose.
5. Lift and remove the door – Once everything is disconnected, grip the door firmly and lift it straight upward. You may need to rock it slightly to free it. Help from another person is useful, especially for rear doors.

When it’s time to put the doors back on, follow the reverse process. Make sure everything aligns correctly and is securely fastened.

To reinstall the doors:

1. Line up the door hinges – Carefully lower the door back onto the hinge pins, ensuring proper alignment.
2. Reattach the hinge bolts – Use the Torx bit to tighten the bolts back into place.
3. Reconnect the wiring – Plug in the electrical connector and lock it with the red tab. Test the mirror and window controls to ensure everything works.
4. Rehook the check strap – Loop the strap back onto its anchor point inside the frame.
5. Test the door – Open and close the door gently to confirm that it’s aligned and secured.

Driving without the doors is a defining part of the Wrangler experience, but always be sure to check local vehicle regulations—some jurisdictions require side mirrors or other features to remain in place. Once you’re all set, hit the road and enjoy the wide-open feeling only a Wrangler can offer.